Block And Bleed Valve 3
Block And Bleed Valve 3
FEATURES
- Available materials: SS316, Inconel, Monel, Duplex, etc.; all wetted parts in accordance with NACE MR01-75
- Heat code traceable to certified material test report
- Low operating torques
- Bar stock body in straight pattern
- Anti-blow-out stem with variety of stem tips
- PTFE packing standard
- Flow coefficient (Cv) from 0.35 to 1.8
- Orifice sizes: 0.156″ (4.0 mm), 0.250″ (6.4 mm), 0.375″ (9.5 mm)
- Variety of end configurations including ARC-LOK tube fittings, male/female NPT, BSPT, BSPP pipe and tube socket weld connections
- Every valve is factory tested
OPERATING PARAMETERS
- Pressure Rating : upto 6000 psig (413 bar) at CWP
- Temperature Rating :
- -54ºC to 232ºC with standard PTFE packing
- upto 426ºC with optional Graphite packing
APPLICATION
- General Plant Service
- Instrument Isolation
- Hydraulic and Pneumatic
- Pressure measurement devices
- Venting
Above item is manufactured in all the following gradess (S.S, ALLOY, C.S ,DUPLEX , SUPER DUPLEX , HASTELLOY, MONEL, INCONEL )
Note:- All dimensions are in millimeters unless otherwise specified . Dimensions are for reference only , subject to change
 Hex Body.png)
.png)
.png)
